Matrix M100 Provozní pokyny stáhnout pdf (Strana 41)

Matrix Installation and Operation Instructions

11.3 Damper Box

Included in the installation kit is a damper box. This

damper box eliminates the infiltration of cold outside

air when the HRV is off or in defrost mode. It is to

be installed with the actuator on the top side and

screw to the Matrix using the four screws provided.

11.4 Condensate Drain

Condensation from defrost will collect in the

ventilator and drain from the sloped drain pan.

This condensation must be evacuated from the

unit. The condensate tubing provided must be

routed through the hole in the side of the

appliance and attached to the 90° elbow directly

underneath the ventilation module. From there

the condensate tube must be emptied into a

suitable floor drain or if necessary the emptying

drain must have a trap to prevent the infiltration

of toxic gases.

IMPORTANT

When using the Simplified System method, exhaust connection to the return must be 4’ from where the

return connects to the Matrix.

IMPORTANT

All main HRV ductwork to be 6” round.

Exterior connections are to be insulated and include a vapor barrier.

Attach End of Su

lied Tubin

This End to Appropriate

Drain or Condensate Pump

Damper Box with Collar Installed

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 54 55

Žádné komentáře

Matrix M100 Provozní pokyny Strana 41